Brocade-communications-systems RFS6000 Manual de usuario Pagina 465

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 839
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 464
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 463
53-1001931-01
Extended ACL config commands
14
permit
Extended ACL config commands
Permits specific packets.
NOTE
ACLs do not allow DHCP messages to flow by default. Configure an Access Control Entry (ACE) to
allow DHCP messages to flow through.
RFController(config-ext-nacl)#permit ip xxx.xxx.xxx.xxx/x 192.168.2.0/24
RFController(config-ext-nacl)#permit ip any host xxx.xxx.xxx.xxx
RFController(config-ext-nacl)#
Supported in the following platforms:
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
Syntax
permit[icmp|ip|tcp|upd|proto]
permit icmp [<source-IP/Mask>|any|host <ip>] [<dest-IP/Mask>|any|host <IP>]
{<ICMP-type> {<ICMP-code>}} {log} {rule-precedence <1-5000>]}
permit ip [<source-IP/Mask>|any|host <IP>] [<dest-IP/mask>|any|host <IP>]
{log} {rule-precedence <1-5000>}
permit [tcp|udp] [<source-ip/mask>|any|host <IP>]
{eq <source-port>|range
<starting-source-port> <ending-source-port>}
[<dest-IP/Mask|any|host <IP>]
{eq
<source-port>} {range <starting-source-port> <ending-source-port>} {log}
{rule-precedence <1-5000>}
permit proto [<1-254>|WORD|eigrp|gre|igmp|igp|ospf|vrrp]
[<source-IP/Mask>|any|host <IP>][<dest-IP/Mask>|any|host <IP>]
{log} {rule-description<WORD>|rule-precedence<1-5000>}
Vista de pagina 464
1 2 ... 460 461 462 463 464 465 466 467 468 469 470 ... 838 839

Comentarios a estos manuales

Sin comentarios