Brocade Communications Systems ICX 6650 Guía de instalación descargar pdf (Pagina 29)

Brocade ICX 6650 Hardware Installation Guide 13

53-1002599-01

Installing the device in a rack or cabinet

2-Post rack mount installation

NOTE

Use the following procedure when installing the Brocade ICX 6650 device in a 2-post rack. For 4-post

racks, follow the procedures in the section “4-Post rack mount installation” on page 14.

Remove the rack mount kit from the shipping carton. The kit contains the following:

• Two L-shaped mounting brackets.

• Sixteen 8-32 x 5/16 in., panhead Phillips screws with patchlocks.

• Four 10-32 x 5/8 in., panhead Phillips screws (torque to 25 in-lb, 29 cm-kg). See item 1 in

Figure 7.

• Eight 32-10 retainer nuts (for square-hole rack rails). See item 2 in Figure 7.

• Eight 32-10 retainer nuts (for round-hole rack rails) See item 3 in Figure 7.

FIGURE 7 2-post screws and retainer nuts

Use the following steps to mount devices in a 2-post rack.

1. Attach the mounting brackets to the sides of the device as illustrated in Figure 8 using the

8-32 x 5/16 in. screws.

FIGURE 8 Attaching the brackets for Brocade ICX 6650 devices

123

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 85 86

Sin comentarios

Brocade Communications Systems ICX 6650 Guía de instalación Pagina 29