Brocade Communications Systems IPMC5000PEF Manual de usuario Pagina 35
- Pagina / 230
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
1/1/16 has 4 groups,
This interface is Querier
default V2
group: 226.6.6.6, life = 240
group: 228.8.8.8, life = 240
group: 230.0.0.0, life = 240
group: 224.4.4.4, life = 240
1/1/24 has 1 groups,
This interface is Querier
default V2
group: 228.8.8.8, life = 240
2/1/16 has 4 groups,
This interface is Querier
default V2
group: 226.6.6.6, life = 240
group: 228.8.8.8, life = 240
group: 230.0.0.0, life = 240
group: 224.4.4.4, life = 240
2/1/24 has 2 groups,
This interface is non-Querier
Querier is 10.5.5.5
Age is 0
Max response time is 100
default V2
**** Warning! has V3 (age=0) nbrs
group: 234.4.4.4, life = 260
group: 226.6.6.6, life = 260
3/1/1 has 4 groups,
This interface is Querier
default V2
group: 238.8.8.8, life = 260
group: 228.8.8.8, life = 260
group: 230.0.0.0, life = 260
group: 224.4.4.4, life = 260
3/1/4 has 1 groups,
This interface is non-Querier
Querier is 10.8.8.8
Age is 0
Max response time is 100
default V2
**** Warning! has V3 (age=0) nbrs
group: 236.6.6.6, life = 260
Displaying the passive interface with other querier present
The following example shows the output in which the VLAN interface is passive and another querier is
present with the lowest IP address.
device#show ip multicast vlan 10
Version=2, Intervals: Query=125, Group Age=260, Max Resp=10, Other Qr=260
VL10: dft V2, vlan cfg passive, 7 grp, 6 (*G) cache, rtr ports,
router ports: 2/1/24(260) 10.5.5.5, 3/1/4(260) 10.8.8.8,
1/1/16 has 4 groups,
This interface is non-Querier (passive)
default V2
group: 226.6.6.6, life = 260
group: 228.8.8.8, life = 260
group: 230.0.0.0, life = 260
group: 224.4.4.4, life = 260
1/1/24 has 1 groups,
This interface is non-Querier (passive)
default V2
group: 228.8.8.8, life = 260
2/1/16 has 4 groups,
This interface is non-Querier (passive)
default V2
group: 226.6.6.6, life = 260
group: 228.8.8.8, life = 260
group: 230.0.0.0, life = 260
group: 224.4.4.4, life = 260
2/1/24 has 2 groups,
This interface is non-Querier (passive)
Querier is 10.5.5.5
Age is 0
Max response time is 100
Displaying the passive interface with other querier present
FastIron Ethernet Switch IP Multicast Configuration Guide 33
53-1003085-02
- FastIron Ethernet Switch IP 1
- Multicast 1
- Contents 3
- Document conventions 9
- Notes, cautions, and warnings 10
- Brocade resources 11
- Getting technical help 11
- Document feedback 12
- About This Guide 13
- 53-1003085-02 14
- IGMP snooping overview 15
- Queriers and non-queriers 16
- VLAN-specific configuration 17
- Tracking and fast leave 17
- Layer 3 multicast routing 18
- IGMP snooping configuration 19
- Configuring the IGMP mode 21
- Configuring the IGMP version 22
- Configuring report control 25
- Enabling fast convergence 27
- IGMP snooping show commands 28
- Clearing the IGMP mcache 36
- IGMP-snooping-enabled VLAN 37
- PIM SM snooping configuration 40
- PIM SM snooping show commands 41
- MLD snooping overview 45
- MLD snooping configuration 50
- Modifying the age interval 52
- Configuring static groups 55
- Disabling static group proxy 55
- MLD-snooping-enabled VLAN 64
- Overview of IP multicasting 73
- Security enhancement for IGMP 77
- Multicast non-stop routing 78
- PIM v4 is configured 79
- PIM v6 is configured 79
- IP multicast boundaries 81
- PIM Dense 83
- Pruning a multicast tree 84
- Grafts to a multicast tree 86
- PIM DM versions 87
- Configuring PIM DM 87
- Enabling a PIM version 88
- Modifying hello timer 89
- Modifying prune timer 89
- Modifying inactivity timer 90
- PIM Sparse 97
- Current limitations 99
- Configuring BSRs 100
- Configuring RPs 101
- Statically specifying the RP 102
- ACL based RP assignment 103
- PIM Passive 104
- Displaying PIM resources 105
- Displaying system values 105
- IPv4 Multicast Protocols 106
- Displaying BSR information 110
- Displaying the RP set list 114
- Displaying PIM RPF 123
- Source Active caching 124
- Configuring MSDP 125
- Disabling an MSDP peer 126
- Displaying MSDP information 129
- Displaying peer information 130
- Displaying MSDP RPF-Peer 135
- Displaying MSDP Peer 136
- Displaying MSDP VRF RPF-Peer 136
- Clearing MSDP information 136
- Configuring MSDP mesh groups 137
- Configuring MSDP mesh group 138
- MSDP Anycast RP 139
- RP 1 configuration 141
- RP 2 configuration 142
- PIMR1 configuration 142
- PIM Anycast RP 143
- Static multicast routes 145
- IGMP Proxy 146
- Default IGMP version 150
- Creating a static IGMP group 153
- Setting the query interval 153
- Displaying IGMPv3 information 154
- Displaying static IGMP groups 156
- Displaying IGMP settings 159
- Source-specific multicast 160
- Configuration Considerations 161
- IGMPv2 SSM mapping 162
- Enabling IGMPv2 SSM mapping 163
- Example configuration 164
- IPv6 Multicast Protocols 165
- IPv6 PIM Sparse 166
- RP paths and SPT paths 167
- Configuring PIM Sparse 167
- IPv6 PIM-Sparse mode 168
- Configuring candidate RP 170
- Embedded Rendezvous Point 171
- Modifying neighbor timeout 173
- Setting the inactivity timer 175
- Changing the hello timer 175
- Configuring a DR priority 176
- Configuring PMRI 177
- Displaying hardware-drop 177
- Displaying IPv6 PIM RPF 189
- Displaying IPv6 PIM counters 189
- Clearing the IPv6 PIM traffic 194
- Enabling MLDv2 199
- Setting the robustness 201
- Setting the version 202
- Specifying a port version 202
- Specifying a static group 202
- Displaying MLD information 203
- Displaying MLD settings 205
- Displaying static MLD groups 206
- Displaying MLD traffic 207
- IPv6 Multicast Boundaries 208
- Configuration considerations 209
- IP Multicast Commands 211
Relacionado con productos y manuales para Software Brocade Communications Systems IPMC5000PEF
(228 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.058 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales