Brocade Communications Systems Switch 53-1001762-01 Manual de usuario descargar pdf (Pagina 201)

Converged Enhanced Ethernet Command Reference 183

53-1001762-01

DRAFT: BROCADE CONFIDENTIAL

Chapter

RMON Commands

rmon alarm

Sets alarm conditions.

Synopsis rmon alarm index snmp_oid interval seconds {absolute | delta} rising-threshold value event

number [falling-threshold value event number [owner name] | owner name]

no rmon alarm index [snmp_oid interval seconds {absolute | delta} rising-threshold value event

number [falling-threshold value event number [owner name] | owner name]]

Operands index Specifies the alarm index. The range of valid values is 1-65535.

snmp_oid Specifies the MIB object to monitor. The variable must be in the SNMP OID

format, for example, 1.3.6.1.2.1.16.1.1.1.5.65535. The object type must be a

counter32.

interval seconds Specifies the alarm sample interval in seconds. The range of valid values is

1-2147483648.

absolute Sets the sample type as absolute.

delta Sets the sample type as delta.

rising-threshold value

Specifies the alarm rising threshold. The range of valid values is

0-4294967295.

event number Specifies the event for the rising alarm. The range of valid values is 1-65535.

falling-threshold value

Specifies the alarm falling threshold. The range of valid values is

0-4294967295.

event number Specifies the event for the rising alarm. The range of valid values is 1-65535.

owner name Specifies the identity of the owner. The maximum number of characters is 32.

Defaults There are no alarms configured.

Command

Modes

Global configuration mode

Description Use this command to set alarm conditions. Use the no rmon alarm command to disable the alarm

conditions.

Usage

Guidelines

There are no usage guidelines for this command.

Examples To set alarm conditions:

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 251 252

Sin comentarios

Brocade Communications Systems Switch 53-1001762-01 Manual de usuario Pagina 201