Brocade Communications Systems Gateway Manual de servicio descargar pdf (Pagina 35)

Access Gateway Administrator’s Guide 4-3

Publication Number: 53-1000430-01

Determining the mapping and port status

To display an N_Port map

1. Connect and log in to the switch.

2. Enter the ag --mapshow command and specify the port number to display the N_Port failover and

failback policies and the mapped F_Ports.

Displaying the port status

This section explains how to determine the ports status.

N_Port Number of the port.

Failover Indicates whether or not the failover policy is enabled (1) or disabled

(0) on the N_Port.

Failback Indicates whether or not the failback policy is enabled (1) or disabled

(0) on the N_Port.

Current F_Ports Shows the F_Ports that are currently connected to the fabric on this

N_Port.

In the case of failover, the Current F_Port and Configured F_Ports

differ. For example (shown below), 8 failed over to this port from

another port.

Configured F_Ports Indicates the ports which are mapped to this N_Port.

switch:admin> ag --mapshow 0

N_Port : 0

Failover(1=enabled/0=disabled) : 1

Failback(1=enabled/0=disabled) : 1

Current F_Ports : 2;8;

Configured F_Ports : 2;

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 61 62

Sin comentarios

Brocade Communications Systems Gateway Manual de servicio Pagina 35