Brocade Communications Systems Gateway Manual de servicio descargar pdf (Pagina 55)

Access Gateway Administrator’s Guide D-7

Publication Number: 53-1000430-01

AG-1007

Check GBIC and other connecting cables and re-enable the F_Port using the portEnable command.

Severity WA RN I NG

AG-1007

Message

Probable

Cause

Indicates the N_Port which is connected to the fabric switch is not online. The N_Port has been

disabled.

Recommended

Action

Check the connectivity between Access Gateway N_Port and fabric switch port.

Severity WA RN I NG

AG-1008

Message

Probable

Cause

Indicates that the fabric switch management server did not accept the login (PLOGI) request sent by the

Access Gateway from the specified N_Port.

Recommended

Action

Verify the configuration on the fabric switch that is connected to the Access Gateway.

If the message persists, run supportFtp to set up automatic FTP transfers; then run the supportSave

command and contact your switch service provider.

Severity WA RN I NG

AG-1009

Message

Probable

Cause

Indicates that the fabric login (FLOGI) request sent to the fabric switch from the Access Gateway

failed.

Recommended

Action

Verify the configuration of the fabric switch..

<timestamp>, [AG-1007], <sequence-number>,, WARNING, <system-name>,

FLOGI response not received for the N_Port <port> connected to

fabric

<timestamp>, [AG-1008], <sequence-number>,, WARNING, <system-name>,

Invalid PLOGI response from the fabric on the N_Port <port>

<timestamp>, [AG-1009], <sequence-number>,, WARNING, <system-name>,

FLOGI sent from N-Port <port> failed

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61 62

Sin comentarios

Brocade Communications Systems Gateway Manual de servicio Pagina 55