Brocade Communications Systems 6510 Guía de instalación descargar pdf (Pagina 36)

FIGURE 9 Installing an 8 Gbps SFP+ in the upper row of port slot

Diagnostic tests

In addition to POST, Fabric OS includes diagnostic tests to help you troubleshoot the hardware and

firmware. This includes tests of internal connections and circuitry, fixed media, and the transceivers

and cables in use.

The tests are implemented by command, either through a Telnet session or through a console set up

to the serial connection to the switch. Some tests require the ports to be connected by external cables,

to allow diagnostics to verify the serializer/deserializer interface, transceiver, and cable. Some tests

require loopback plugs.

Diagnostic tests run at link speeds of 2, 4, 8, 10, or 16 Gbps (FC) depending on the speed of the link

being tested and the type of port.

NOTE

Diagnostic tests might temporarily lock the transmit and receive speed of the links during diagnostic

testing.

For information about specific diagnostic tests, see the Fabric OS Troubleshooting and Diagnostics

Guide.

Diagnostic tests

36 Brocade 6510 Hardware Installation Guide

53-1002174-10

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 65 66

Sin comentarios

Brocade Communications Systems 6510 Guía de instalación Pagina 36