Brocade Communications Systems LS-STK Guía de instalación descargar pdf (Pagina 38)

28 Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide

53-1002187-01

Attaching a PC or terminal

DRAFT: BROCADE CONFIDENTIAL

The EIA or TIA 232 serial communication port serves as a connection point that allows

management through a PC or SNMP workstation. Brocade devices come with a standard male

DB-9 connector, shown in Figure 25.

FIGURE 25 Serial port (DB-9 DTE) pin-out

Most PC serial ports also require a cable with a female DB-9 connector.

Terminal connections will vary, requiring either a DB-9 or DB-25 connector, male or female.

Serial cable options between a Brocade device and a PC or terminal are shown in Table 10.

Wiring map for serial cable

NOTE

As indicated in Table 10, some of the wires should not be connected.

TABLE 10 Serial cable wiring

device 9-Pin serial port Null modem PC 9-Pin DTE port

2 RXD (receive data) <---------------------------- 2 TXD (transmit data)

3 TXD (transmit data) ----------------------------> 3 RXD (receive data)

5 SGND (signal ground) ----------------------------- 5 SGND (signal ground)

No other pins are used.

6 9

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 93 94

Sin comentarios

Brocade Communications Systems LS-STK Guía de instalación Pagina 38