Brocade Communications Systems LS-STK Guía de instalación descargar pdf (Pagina 68)

58 Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide

53-1002187-01

Diagnosing device indicators

DRAFT: BROCADE CONFIDENTIAL

In-band access

You can access the management agent in the device from anywhere within the attached network

using Telnet, a Web browser, or other network management software. However, you must first

configure the device with a valid IP address, subnet mask, and default gateway. If you have trouble

establishing a link to the management agent, make sure you have a valid network connection.

Then verify that you entered the correct IP address. Also, be sure the port through which you are

connecting to the device has not been disabled. If it has not been disabled, then check the network

cabling that runs between your remote location and the device.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 93 94

Sin comentarios

Brocade Communications Systems LS-STK Guía de instalación Pagina 68