Brocade Communications Systems 825 Guía para resolver problemas descargar pdf (Pagina 122)

98 Brocade Adapters Troubleshooting Guide

53-1002145-01

Collecting SFP data (stand-up adapters)

This section provides an overview of BCU commands and HCM features that provide information on

small form factor pluggable (SFP) transceivers.

SFP properties

BCU and HCM provide detailed information on the SFP transceiver for a selected port, such as its

health status, port speed, connector type, minimum and maximum distance, as well as details on

the extended link.

Displaying SFP properties through BCU

Use the diag --sfpshow BCU command to display detailed attributes for a specific SFP transceiver.

diag --sfpshow <port_id>

where:

port_id ID of the port for which you want to display SFP attributes. This could be the

PWWN, port hardware path, or user-specified port name. This could also be

the adapter-index/port-index. For example, to specify adapter 1, port 1, you

would use 1/1 as the port identification.

Initiating SFP properties through HCM

Launch the port SFP properties dialog box as follows to display properties for a selected small

form-factor pluggable (SFP) transceiver.

1. Launch the HCM.

2. Select a port in the device tree.

3. Click the SFP tab in the right pane.

Predictive optical monitoring (POM)

Use the POM field in the port properties panel to monitor the SFP attributes. A notification is given

for any parameters that are not within the power, temperature, voltage, and current specifications.

To display this panel, use the following steps.

1. Select a port in the device tree.

2. Click the Properties tab in the right pane.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 171 172

Sin comentarios

Brocade Communications Systems 825 Guía para resolver problemas Pagina 122