Brocade Communications Systems BR-1020 Guía para resolver problemas Pagina 103
- Pagina / 110
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Brocade Adapters Troubleshooting Guide 85
53-1001253-01
Event Message Reference
A
Virtual port (WWN = [logical port
WWN]) login failed. Max NPIV ports
already exist in fabric/fport.
Warning Storage driver 3 (LPORT) Failed Max NPIV ports
already exist in
fabric/fport.
Check fabric and
fport
configuration
Virtual port (WWN = %s) login failed. Warning Storage driver 3 (LPORT) Failed Unknown error. Check
fabric/fport
configuration.
Network and Storage Driver Events
Adapter removed: SN = [adapter
serial number]
Warning Network and
storage driver
1
(Adapter)
Removed Adapter removed. Check PCIe slot
and
configuration.
Authentication successful for base
port: WWN = [base port WWN or
MAC]
Information Network and
storage driver
2 (Port) Successful Authentication
successful.
No action
required.
Authentication unsuccessful for base
port: WWN = [base port WWN or
MAC]
Error Network and
storage driver
2 (Port) Failure Authentication
failure.
Mismatch of
FC-SP
configuration
between switch
and HBA. Also,
check the
authentication
secret settihg.
Base port enabled: Hardware
Address = [base port WWN or MAC]
Information Network and
storage driver
2 (Port) Enabled Base port enabled
by user command.
No action
required.
Base port disabled: Hardware
Address = [base port WWN or MAC]
Warning Network and
storage driver
2 (Port) Disabled Base port disabled
by user command.
No action
required.
Base port online: WWN = [Base Port
WWN]
Information Network and
storage driver
2 (Port) Online Base port logged
into fabric.
No action
required.
Base port offline: WWN = [Base Port
WWN]
Warning Network and
storage driver
2 (Port) Offline Base port logged
out of fabric.
No action
required.
Base port (WWN = [base port WWN
or MAC]) lost fabric connectivity.
Error Network and
storage driver
2 (Port) Logout Base port lost
connection with
fabric.
Check switch and
HBA
configuration.
Also, check SFP
and cable
connection.
Heart Beat of IOC [IOC instance
number] is good.
Information Network and
storage driver
9 (TOC) Restart Successful restart
of firmware after a
failure.
No action
required.
Heart Beat of IOC [IOC instance
number] has failed.
Critical Network and
storage driver
9 (TOC) Crash Firmware not
responding.
Collect all error
information and
restart the
firmware. Invoke
bfa_supportsave.
IOC [IOC instance number] is
enabled.
Information Network and
storage driver
9 (TOC) Enabled Adapter firmware
started by user
command.
No action
required.
TABLE 9 Driver event messages
Message Severity Event Type Category Sub
Category
Cause Action
- Brocade Adapters 1
- Document History 2
- Contents 3
- About this Document 9
- CNA support 10
- Fabric OS and switch support 10
- Host operating system support 10
- HBA support 11
- What’s new in this document 12
- Document conventions 13
- Notes, cautions, and warnings 14
- Key terms 14
- Notice to the reader 15
- Additional information 15
- Providing details for support 16
- Command Function 17
- Document feedback 18
- In this chapter 19
- Gathering problem information 20
- TABLE 1 Topology map details 21
- Isolating Problems 23
- How to use this chapter 24
- Isolate adapter problems 24
- General HBA and CNA problems 26
- Port link is not active 27
- • The agent is not running 30
- BCU version mismatch warning 33
- HBA problems 34
- UEFI boot problems 35
- • Reseat the adapter 36
- BIOS boot problems 37
- LUN not visible from host 38
- Configuration menu 38
- • nm-tool 40
- Poor network performance 45
- FCoE link is down 48
- CEE is not enabled 50
- Application Tool References 51
- Information Chapter 52
- Tools for Collecting Data 57
- Data to provide support 58
- Support Save 60
- Support Save differences 62
- • authUtil 63
- • cfgShow 63
- Adapter event messages 65
- Host system logs 66
- HCM logs 67
- Logging levels adjustment 68
- Port logging level 69
- Statistics 70
- CEE statistics (CNA only) 71
- CEE query (CNA only) 71
- FCoE statistics (CNA only) 74
- Fabric statistics 74
- IOC statistics 75
- Logical port statistics 76
- Port statistics 77
- Remote port statistics 77
- VLAN Statistics (CNA only) 79
- Diagnostics 80
- • Internal 81
- • External 81
- PCI loopback test 83
- Memory test 84
- Adapter temperature 84
- Ping end points 84
- Trace route 85
- Echo test 86
- SCSI test 86
- Collecting SFP data 87
- Collecting port data 88
- Authentication settings 91
- Persistent binding 93
- Performance optimization 95
- Solaris tuning 96
- Windows tuning 96
- Tuning network drivers 97
- Linux tuning 98
- VMware tuning 99
- 53-1001253-01 100
- Event Message Reference 101
- TABLE 9 Driver event messages 102
© 2020, manymanuals.es. Todos los derechos reservados | 0.076 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales