Brocade Communications Systems BR-1020 Guía para resolver problemas Pagina 90
- Pagina / 110
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
72 Brocade Adapters Troubleshooting Guide
53-1001253-01
Collecting port data
3
• Maximum transmission unit (MTU)
• Target rate limiting (TRL) enabled or disabled status
• SCSI queue depth
• Beaconing status
• Fibre Channel Initialization Protocol (FCIP) online or offline state
• Priority group ID
• Bandwidth percentage for priority group
• MAC address for FCoE forwarder
• Fabric WWN
• Fibre Channel map ID
• FCoE forwarder writing or nonwriting mode
To display the HCM FCoE Port Properties panel, use these steps.
1. Select an FCoE port in the device tree.
2. Click the Properties tab in the right pane.
Displaying remote port properties
Use the HCM Remote Port Properties panel to display properties that are associated with the
remote port, such as WWN, node WWN, port name, Fibre Channel address, frame data field size,
online or offline state, role (such as target or initiator), remote device information, QoS priority, QoS
flow, and target ID.
1. From the device tree, select a remote port.
2. Click the Remote Port Properties tab in the right panel.
If it is a target port, two tabs display in the right pane: Properties and LUNs.
Displaying logical port properties
Use the HCM LPorts Properties panel to display properties associated with a logical port, such as
port and node WWN, Fibre Channel address, online or offline state, and name server activity. To
display logical port properties, use the following steps.
1. From the device tree, select a logical port.
2. Click the LPORTs Properties tab in the right panel.
Displaying virtual port properties
Use the HCM Virtual Port Parameters properties panel to display the properties associated with a
virtual port, such as port and node WWN, Fibre Channel address, offline or online state, role (such
as FCP initiator), and attached switch WWN. To display virtual port properties, use the following
steps:
1. From the device tree, select a virtual port.
2. The Virtual Port Parameters properties panel displays.
- Brocade Adapters 1
- Document History 2
- Contents 3
- About this Document 9
- CNA support 10
- Fabric OS and switch support 10
- Host operating system support 10
- HBA support 11
- What’s new in this document 12
- Document conventions 13
- Notes, cautions, and warnings 14
- Key terms 14
- Notice to the reader 15
- Additional information 15
- Providing details for support 16
- Command Function 17
- Document feedback 18
- In this chapter 19
- Gathering problem information 20
- TABLE 1 Topology map details 21
- Isolating Problems 23
- How to use this chapter 24
- Isolate adapter problems 24
- General HBA and CNA problems 26
- Port link is not active 27
- • The agent is not running 30
- BCU version mismatch warning 33
- HBA problems 34
- UEFI boot problems 35
- • Reseat the adapter 36
- BIOS boot problems 37
- LUN not visible from host 38
- Configuration menu 38
- • nm-tool 40
- Poor network performance 45
- FCoE link is down 48
- CEE is not enabled 50
- Application Tool References 51
- Information Chapter 52
- Tools for Collecting Data 57
- Data to provide support 58
- Support Save 60
- Support Save differences 62
- • authUtil 63
- • cfgShow 63
- Adapter event messages 65
- Host system logs 66
- HCM logs 67
- Logging levels adjustment 68
- Port logging level 69
- Statistics 70
- CEE statistics (CNA only) 71
- CEE query (CNA only) 71
- FCoE statistics (CNA only) 74
- Fabric statistics 74
- IOC statistics 75
- Logical port statistics 76
- Port statistics 77
- Remote port statistics 77
- VLAN Statistics (CNA only) 79
- Diagnostics 80
- • Internal 81
- • External 81
- PCI loopback test 83
- Memory test 84
- Adapter temperature 84
- Ping end points 84
- Trace route 85
- Echo test 86
- SCSI test 86
- Collecting SFP data 87
- Collecting port data 88
- Authentication settings 91
- Persistent binding 93
- Performance optimization 95
- Solaris tuning 96
- Windows tuning 96
- Tuning network drivers 97
- Linux tuning 98
- VMware tuning 99
- 53-1001253-01 100
- Event Message Reference 101
- TABLE 9 Driver event messages 102
© 2020, manymanuals.es. Todos los derechos reservados | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales