Brocade Communications Systems BR-1020 Guía para resolver problemas descargar pdf (Pagina 89)

Brocade Adapters Troubleshooting Guide 71

53-1001253-01

Collecting port data

• Operating speed

• Receive and transmit BB credit

• Frame data field size

• MPIO enabled or disabled status

• Queue depth

• Interrupt control coalesce on or off status

• Interrupt control latency and delay values

• Boot over SAN configuration

• Beaconing state

• Target rate limiting on or off status

• FC-SP parameter statistics

• MPIO on or off state

• Health status of Fibre Channel security protocol parameters

To display CEE port properties, use the following steps:

1. Select a CEE port in the device tree.

2. Click the Properties tab in the right pane.

Displaying Ethernet port properties (CNA only)

The HCM Ethernet Port Properties panel enables you to display the properties associated with a

selected Ethernet port.

Information such as the following displays:

• Name of Ethernet device

• Port type

• MAC address

• IOC identification

• WWN of hardware

• Status of port, such as linkup

• Ethernet logging level

To display Ethernet port properties, use the following steps.

1. Select an Ethernet port in the device tree.

2. Click the Properties tab in the right pane.

Displaying FCoE port properties (CNA only)

Use the HCM FCoE Port Properties to display FCoE port properties such as the following:

• Port WWN

• Node WWN

• Supported class

• FC frame size

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 109 110

Sin comentarios

Brocade Communications Systems BR-1020 Guía para resolver problemas Pagina 89